The choice of marking technology depends on a number of factors, such as material type, required precision, production volume, frequency of use, marking durability, budget or environmental conditions. At Sic Marking, we offer the main marking technologies, such as laser, dot-peen and scribing.

Our experts can advise you on the solution best suited to your specific needs after a detailed analysis of your requirements.

Contact our team of specialists here.

Laser marking is appreciated for its high precision, high speed and ability to mark a wide range of materials (metals, plastics, ceramics) without direct contact, and because it therefore contains no wearing parts. Compared with dot-peen, laser marking delivers finer, more precise markings and real contrast, making content easier to read, while scribing is often used for deeper, more resistant markings.

Dot-peen is suitable for marking various materials such as metals (stainless steel, aluminum), plastics, ceramics and certain composites. It guarantees permanent, wear-resistant marking, ideal for industrial applications.

Contact our dot-peen expert by clicking here.

Scribing offers a smoother, cleaner finish, making it ideal for surfaces where aesthetics are paramount. Unlike dot-peen, which creates visible dots, scribing produces continuous lines, giving a cleaner, more elegant finish.

The scribing marking process is also quieter than dot-peen, making it a more suitable solution for working environments where noise reduction is important.

Finally, scribing is particularly effective for marking hard or treated materials. The scribing stylus exerts a constant pressure that enables deep, durable marking, even on surfaces that are difficult to work on.

Contact us to find out which technology is best suited to your needs.

Yes, our laser and dot-peen marking machines are designed to handle objects of all shapes, including cylindrical parts. They are equipped with suitable rotation and clamping systems to ensure uniform, precise marking on curved surfaces. Laser marking can be combined with the 3D marking option, which enables marking on cylinders without rotating them.

Marking depth can be adjusted according to the technology used and the setting parameters. Laser enables shallow or deeper marking as required, while dot-peen and scribing offer precise depth control to suit different applications.

Yes. SIC Marking offers industrial marking solutions including laser, particularly suitable for applications requiring precision, speed and non-contact marking.

The marking technologies we offer allow permanent and legible markings, even after certain surface treatments, depending on the chosen technology and application.

Depending on the need, different technologies such as dot-peen, scribing or certain laser configurations can be used to obtain deep and durable marking.

Yes. SIC Marking solutions allow the marking of DataMatrix codes, QR codes, barcodes, alphanumeric characters and logos to meet industrial traceability requirements.

SIC Marking solutions are designed to meet the requirements of industrial environments and traceability constraints specific to each sector.

Marking technologies ensure excellent readability over time, even in demanding industrial environments.

Yes. SIC Marking supports manufacturers with permanent marking solutions adapted to the traceability requirements of parts and components.

Depending on the technology used, in particular the laser, it is possible to make markings with a limited impact on the surface finish.

To see our marking machines in action, request a personalized demonstration by filling in our contact form.

Depending on your specific needs, we can offer you marking machine rental options, enabling you to start production as quickly as possible. Contact our sales team for more information on rental options.

Yes, we offer on-site demonstrations so that you can see our machines in action in your production environment. This makes it easier to assess the compatibility of our solutions with your processes.

Depending on your needs and on request, we can offer you annual on-site maintenance.

Yes, Sic Marking offers preferential rates for non-profit organizations. Contact our sales department via this link: https: //www.sic-marking.com/contact-us/ with details of your association to discuss our available discount offers.

Yes, we offer comprehensive training in the use of our marking machines. These courses can be delivered remotely or on-site, and cover installation, operation, basic maintenance, and best practices for optimizing your production.

Yes. SIC Marking supports its customers before purchase and offers after-sales services to ensure the performance of solutions.

The sales department can prepare a personalized quote tailored to the needs of the project.

Delivery times vary depending on the products and configurations. A precise estimate is provided by the sales teams.

The choice of an industrial marking machine depends on the material, the frequency of use, and the specifics of your project (type of marking to be carried out, production volume…). At SIC MARKING, we advise you after a complete evaluation of your needs to guarantee maximum productivity.

Contact our team of specialists here.

The speed of our marking machines optimizes your production, with a marking time of just a few seconds per part, depending on the technology and complexity of the design.

In addition to marking, initially used for identification purposes, our machines offer advanced traceability solutions enabling each part to be tracked throughout its lifecycle to guarantee quality, regulatory compliance and facilitate problem management by rapidly identifying the batches concerned.

Marking machines also open up a whole new field of opportunities by enabling surface preparation or texturing, offering new uses for optimizing your manufacturing processes.

Find out more about these new “Lasering” applications here.

Yes, our machines are compatible with barcode readers equipped with handhelds, making them easy to integrate into your production processes for optimized tracking and tracing.

Yes! Our technologies, such as laser and dot-peen, guarantee legible marking even after various surface treatments (painting, galvanizing, sandblasting, shot blasting, heat treatment, hot stamping, E-coat, KTL or cataphoresis, machining).

Yes, we offer marking machines capable of handling large parts, such as XXL-BOX, L-MOOV or FIT. Our equipment is designed to maintain high precision and efficiency, even for bulky objects.

You can buy your consumables directly from our after-sales service by filling in the contact form in the after-sales service section.

The choice depends on the type of application, the material to be marked and the constraints of use.  Our SIC Marking teams will accompany you to validate with you the solution adapted to your needs. Furthermore, you can also use our configurator in advance to get an overview of the proposed solutions.

SIC Marking offers portable machines designed for mobile use, offering robustness, autonomy and ease of use on site.

The choice depends on the type of parts, the production volume and the expected level of precision. The online configurator allows a first orientation before validation by SIC Marking experts.

The SIC Marking machines have a software to create and control markings as needed.

The interfaces are designed for intuitive industrial use, facilitating a quick handling.

Yes. The solutions allow the integration of logos, serial numbers and other marking data.

Absolutely. Marking systems allow the automation of series markings and traceability data.

The proposed technologies ensure accurate and repeatable marking, adapted to the constraints of industrial production.

The proposed technologies allow the marking of nameplates, thin supports and other industrial applications.

Our machines are designed for long life, often in excess of 10 years, thanks to high-quality components and robust engineering. Regular maintenance also helps to extend their service life.

Sic Marking machines are covered by a standard 12-month warranty, including repairs for manufacturing defects and initial malfunctions. Laser sources come with a 24-month warranty.

Yes, some wearing parts, such as dot-peen stylus or mechanical guide components, may need to be replaced periodically to maintain optimum machine performance. When using a LASER, suction system filters must be replaced regularly.

You will find a list of error codes in the technical documentation supplied with your machine.

You can obtain our technical documentation directly from our customer service department here.

You can download your controller battery replacement sheet according to your model:

A. Overview:

The SIC E8 and E9 drivers are not digitally signed, as they were developed for older operating systems (Windows XP/Vista). However, they can still be installed on Windows 10 or 11 by disabling driver signature enforcement during the installation process.

B. Steps to disable driver signature enforcement on Win10&11:

1. Click on “Windows“ button, then press and hold the “Shift“ key and click on keyboard and click on “Power setting –>­­ Restart“.

2. Choose “Troubleshoot –>­ Advanced options –>­ Startup Settings“ and click the “Restart“ button.

3. When your computer restarts you will see a list of options : Press “F7“ or 7 key on keyboard to select Disable driver signature enforcement.

4. Computer will now restart.

C. Steps to installing e9/e8 driver in windows 10&11:

1. After restarting, Open “Device manager“ you can see “E8 Marking system“ which will be under “Other Devices“, on that do right-click then choose “Update Driver Software“.

2. Click on “Browse my computer for driver software“

3. Choose the path of the Driver (Ex: software folder copied path e9-v1-2.000 —>­ Drivers), Then click on “Include Subfolders” checkbox and then click on “Next”.

4. In windows security pop-up click on “Install this driver anyway” .

Then installation starts and finish.

After closing the window you can see installed “E8 Marking System” under Universal Serial Bus Controllers but still “USB Serial Driver Port” not installed.

5. Right-click on “USB Serial Port” then choose “Update Driver Software”, as shown in the image.

6. Follow the same steps from 6 to 8, the completion of installing driver will finish with the below screen.

After closing the window you can see installed “E8 Marking System” under “Ports” with installed com port number.

Now the computer is ready to communicate with e9/e8 controller through the SIC Tools or Terminal software.

SIC Marking offers maintenance and support services tailored to customer needs, as close as possible to your location.

Our machines are made in France, with particular attention paid to the quality of components and technical expertise to guarantee reliable, high-performance equipment.